天堂島精品??_91中文字日產亂幕六區_.手.動.輸.入.網.址.聯.系.客.服.人.員.lanan_shell
?(4) ?Remove the QAR (1) from its rack (3).
?(5) ?Put blanking caps on the disconnected electrical connectors (2).
R 1EFF : 001-049, 051-099, 101-105, 1 31-33-52Page 402 1 1 May 01/05 1 1 1CES 1
?Quick Access Recorder (QAR) ?Figure 401/TASK 31-33-52-991-001
R 1EFF : 001-049, 051-099, 101-105, 1 31-33-52Page 403 1 1 May 01/05 1 1 1CES 1
?TASK 31-33-52-400-001 ?Installation of the Quick Access Recorder (QAR) (3TU)
?1. ?Reason for the Job
__________________ ?Self Explanatory
?2. ?Job Set-up Information
______________________ ?A. Fixtures, Tools, Test and Support Equipment ?-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION ------------------------------------------------------------------------------- No specific access platform 1.6 m (5 ft. 3 in.) ?B. Referenced Information ?-------------------------------------------------------------------------------REFERENCE DESIGNATION ------------------------------------------------------------------------------- 31-33-00-710-005 Operational Test of the QAR 52-41-00-410-002 Close the Avionics Compartment Doors after Access 31-33-52-991-001 Fig. 401 ?3. Job Set-up __________ Subtask 31-33-52-860-050 ?A. Aircraft Maintenance Configuration ?(1) ?Make sure that the access platform is in position at the access door 824 in zone 128.
?(2) ?Make sure that the access door 824 is open.
R 1EFF : 001-049, 051-099, 101-105, 1 31-33-52Page 404 1 1 May 01/05 1 1 1CES 1 Subtask 31-33-52-865-051
?B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged ?-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU RCDR/ACCLRM 9TU K18 121VU FDIU & QAR 8TU K17 ?4. Procedure _________ ?(Ref. Fig. 401/TASK 31-33-52-991-001) Subtask 31-33-52-420-050 ?A. Installation of the Quick Access Recorder (QAR) ?(1) ?Clean the component interface and/or the adjacent area.
?(2) ?Do an inspection of the component interface and/or the adjacent area.
?(3) ?Remove the blanking caps from the electrical connectors (2).
?(4) ?Make sure that the electrical connectors (2) are clean and in the correct condition.
?(5) ?Install the QAR (1) on its rack (3).
?(6) ?Push the QAR (1) on its rack (3) to connect the electrical connectors (2).
?(7) ?Engage the nuts (4) on the lugs (5) and tighten. Subtask 31-33-52-865-052
?B. ?Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 8TU, 9TU
?Subtask 31-33-52-710-051 ?C. Do the operational test of the QAR (Ref. TASK 31-33-00-710-005). R 1EFF : 001-049, 051-099, 101-105, 1 31-33-52Page 405 1 1 May 01/05 1 1 1CES 1
?5. Close-up ________ Subtask 31-33-52-410-050 ?A. Close Access ?(1) ?Make sure that the work area is clean and clear of tool(s) and other items.
?(2) ?Close the access door 824. (Ref. TASK 52-41-00-410-002)
?(3) ?Remove the access platform(s).
R 1EFF : 001-049, 051-099, 101-105, 1 31-33-52Page 406 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 31-33-55Page 401 1 1 May 01/00 1 1 1CES 1 Subtask 31-33-55-865-050
?RECORDER - DIGITAL FLIGHT DATA (DFDR) (1TU) - REMOVAL/INSTALLATION__________________________________________________________________ ?TASK 31-33-55-000-001 ?Removal of the Digital Flight Data Recorder (DFDR)? R R R R? WARNING : PUT WARNING NOTICES IN THE COCKPIT TO TELL PERSONS NOT TO OPERATE THE_______ FLIGHT CONTROLS. THE MOVEMENT OF THE TRIMMABLE HORIZONTAL STABILIZER (THS) CAN CAUSE INJURY TO PERSONS. ?1. Reason for the Job__________________ ?Self Explanatory ?2. Job Set-up Information______________________ ?A. Fixtures, Tools, Test and Support Equipment ?-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION ------------------------------------------------------------------------------- No specific No specific No specific? blanking capscircuit breaker(s) safety clip(s)access platform 3.4 m (11 ft. 2 in.) ?B. Referenced Information ?-------------------------------------------------------------------------------REFERENCE DESIGNATION ------------------------------------------------------------------------------- www.aero.cn 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 3
