糖心logo官網(wǎng)?_荒野大鏢客2男女_.手.動.輸.入.網(wǎng).址.聯(lián).系.客.服.人.員.lanan_shell
AILERON AILERON/RUDDER TRIM CONTROL MODULE TRIM SWITCHES A LIGHTPLATE RUDDER TRIM A SWITCH SHAFT SWITCH SHAFT LOCKNUT STAR WASHER 1.169 LIGHTPLATE INCHES RUDDER TRIM 1.156 SWITCH MODULE BASEPLATE LOCKNUT LOCKNUTS STAR WASHER A WASHER MODULE BASEPLATE SHIMS (SGD-005H B ?AND SGD-015H) AND/OR WASHER RUDDER (AN960XC816L) TRIM SWITCH 1 ?DO NOT CHANGE THIS LOCKNUT SETTING DURING THE SWITCH INSTALLATION OR ADJUSTMENT. IT IS POSSIBLE THAT THE LOCKNUT 1 SWITCH WILL NOT ALIGN IF YOU CHANGE THE LOCKNUT SETTING. A-A 2 ?AIRPLANES WITH THE ROUND KNOB 3 ?AIRPLANES WITH THE BLADE KNOB Aileron/Rudder Trim Control Module Installation Figure 401
F64405 ?EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
?27-11-94 ?ALL ?ú ú 02 Page 402 ú Jul 12/00 BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. A 737-300/400/500MAINTENANCE MANUAL ?TASK 27-11-94-404-019 ?3. ?Aileron and Rudder Trim Control Module Installation___________________________________________________ ?A. Access ?(1) ? Location Zone ?101 Control Cabin, LH ?102 Control Cabin, RH
?B. Install the Aileron and Rudder Trim Control Module
?S 424-008 ?(1) ? Install the trim control module:
?(a) ? Connect the electrical connectors to the trim control module.
?(b) ? Install the trim control module in the P8 panel.
?(c) ? Install the four fasteners.
?S 864-029 ?(2) Remove the DO-NOT-CLOSE tags and close these circuit breakers:
?(a) ? P6-2 Circuit Breaker Panel ?1) RUDDER TRIM INDICATOR ?2) AILERON TRIM CONTROL ?3) RUDDER TRIM CONTROL
?TASK 27-11-94-004-020 ?4. ?Trim Control Switches Removal_____________________________ ?A. Access ?(1) ? Location Zone ?101 Control Cabin, LH ?102 Control Cabin, RH
?(1) ? Remove the aileron and rudder trim control module.
?(2) ? Remove the rudder trim knob from the switch shaft.
?(3) ? Remove the lightplate from the trim control module.
?(4) ? Remove the aileron trim switch:
?(a) ? Remove the locknut from the aileron trim switch.
?(b) ? Disconnect the electrical wires.
?S 024-030 ?S 034-009 ?S 034-010 ?EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
?27-11-94 ?ALL ?ú ú 02 Page 403 ú Mar 15/96 BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. A 737-300/400/500MAINTENANCE MANUAL ?S 024-012 ?(5) ? Remove the rudder trim switch:
?(a) ? Bend the tab down on the star washer.
?(b) ? Remove the locknut.
?(c) ? Disconnect the electrical wires.
?TASK 27-11-94-404-021 ?5. Trim Control Switches Installation (Fig. 401) __________________________________ ?A. Access ?(1) ? Location Zone ?101 Control Cabin, LH ?102 Control Cabin, RH
?S 424-005 ?(1) ? Install the aileron trim switch:
?(a) ? Install the aileron trim switch in the trim control module from the bottom.
?(b) ? Install the locknut.
?S 424-013 ?(2) ? Install the rudder trim switch:
?(a) ? Put the rudder trim switch up through the module baseplate.
?(b) ? Use a mixture of shims or a washers to get the specified dimension between the switch shaft and the baseplate (Detail A).
?(c) ? Put the washer, star washer and locknut on the switch shaft.
?(d) ? www.aero.cn 航空翻譯 www.aviation.cn 本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 2
